Kitchen Door Replacement Glasgow
We cut replacement kitchen doors, cabinet doors, and drawer fronts to your existing kitchen’s exact measurements, taking hinge positions and panel dimensions from the actual unit rather than a standard size chart.
If you’re revamping your kitchen, the Wrap Wizard team can help. We offer kitchen wrapping alongside door replacement for damaged or worn cabinet doors.
Talk to our team today to arrange your free, no-obligation quote.
Cutting a door to your exact cabinet size
We record the width, height, and hinge positions from your actual cabinet, not a catalogue size, then cut the new door to that exact spec before it’s wrapped to match the rest of your makeover.
Cabinet runs throw up small variations between units even within the same kitchen.
A door made to measure for one cupboard rarely fits its neighbour without adjustment. Cutting to the individual cabinet avoids that guesswork entirely.
Hinge positions get marked and drilled to match what’s already there, so handles, hinges, and any hardware you want to keep line up first time.
When a door needs cutting fresh rather than wrapped
Wrapping works on any door that’s structurally sound, whatever its current finish.
It doesn’t work once the board underneath has already started to fail.
Water pooling under a sink is the most common cause, usually swelling the bottom edge of a door until it no longer sits flush.
Cracked panels and corners chipped down to bare MDF near a handle cut-out are the other two we see most often.
We’ll flag a door like that honestly at the survey, and luckily we have a solution!
We can get a fresh, bespoke replacement door cut.
Then we wrap it to keep the whole run looking consistent, rather than sealing damage in under a layer of film that won’t stay down.
This gives your kitchen a perfect makeover and a completed look.
Replacing one door in an otherwise wrapped kitchen
One replacement door among a run of wrapped originals is just as straightforward as a full kitchen of new-cut doors.
Most jobs involve a single damaged unit, not a wall of them.
Drawer fronts fail the same way doors do, usually around a runner or handle, and get the same treatment: cut fresh, wrapped to match, and fitted back into the same run.
What a new door or cupboard is cut from
MDF machines cleanly to an exact size and takes heat-formed vinyl without the film cracking or lifting at the edges later, which is why every bespoke door and cupboard face gets cut from it.
The board gets cut, routed where a profile or panel detail is needed, and sanded smooth before it reaches the wrap stage.
A rough or uneven edge shows through the film once it’s applied, so this preparation stage decides how the finished door looks as much as the wrap itself does.
New cupboard carcases are built from the same board used across the rest of a fitted kitchen.
That’s why a new unit sits at the same height and depth as its neighbours, with no visible step where old meets new.
Wrapping the new cupboard and door to match
A new cupboard or door arrives as bare board, and it goes through the same wrap process as the rest of your kitchen before it’s fitted.
It is cleaned, primed, and covered in architectural vinyl heat-formed around every edge and profile.
Colour and finish are matched against your existing wrapped units at the survey, using physical samples rather than a screen or a swatch card.
Worktops can be wrapped or replaced in the same visit if a new cupboard changes the run’s length or depth, so the join between old and new isn’t visible once everything’s back together.
The guarantee on every new door and cupboard
The guarantee on every door and cupboard we cut, build, and wrap covers both the workmanship and the material itself, built to last through years of everyday kitchen use.
Boards get cleaned, keyed, and primed before any vinyl goes on, and edges are heat-formed rather than folded or taped.
That leaves no loose seam for moisture to work into over time.
A new cupboard or door goes through exactly the same standard as a wrap on an original unit, so a repaired kitchen doesn’t end up with one weaker point among otherwise solid work.
Door styles and finishes
Shaker, slab, tongue-and-groove, and handleless are the profiles we cut and wrap most often, and styles and colours are usually chosen as two separate decisions.
Matt white, anthracite grey, and oak woodgrain come up most often across all four profiles, though the full range runs to dozens of finishes, including textured concrete effects and metallic tones that a factory-painted door can’t easily match.
Shaker tends to age best if you’re undecided: it’s a simple recessed panel that still looks right in ten years, long after a fashion-led handleless run has dated.
Mixing finishes across one kitchen is straightforward too, since a wrapped door doesn’t need a separate manufacturing run for every colour change.
A darker base run with a lighter run of wall units, or a single feature cupboard in a bolder finish, costs no more to cut and wrap than a kitchen finished in one colour throughout.
We listen to your design preferences and ideas before suggesting possible makeover ideas!
How fitting works with Wrap Wizard
- Survey and measure – We visit your kitchen, measure every cabinet that needs a new door or a new cupboard, and go through finishes with physical samples.
- Cutting and building – If replacement doors are needed, they are cut to size at a workshop and new cupboard carcases built and levelled, all before any wrap film goes on.
- Wrapping – Every new door and cupboard face is cleaned, primed, and wrapped in your chosen finish, matched against the units already in place.
- Fitting – Hinges, handles, and any new cupboards go in, and everything gets checked under normal kitchen lighting before we leave.
Most jobs run from survey to finished kitchen within a week, and a single door or cupboard is often done in a day.
Areas we cover
We’re based in Kirkintilloch and cover kitchens across Glasgow and Central Scotland day to day, including Bishopbriggs, Bearsden, Milngavie, Cumbernauld, and across the Southside and East End.
East Kilbride, Cambuslang, Paisley, Hamilton, and Clydebank are all within easy reach too, and we travel further across Greater Glasgow and beyond for larger projects.
Tenement kitchens, new-build flats, and older bungalow kitchens all come with their own cabinet quirks, from non-standard cupboard widths to hinge styles that stopped being sold years ago. Our fitter and cutting team carry styles to suit any of them, which means none of that rules a repair out.
We also handle commercial kitchen wrapping for landlords and hospitality operators managing several properties at once, where matching a new cupboard to an existing wrapped kitchen matters just as much as it does in a family home.
Kitchen door replacement in Glasgow: common questions
Will a new door or cupboard match the rest of my kitchen exactly?
That’s the idea! The new piece goes through the same wrap process and the same finish as everything else, matched with physical samples at the survey rather than guessed from a screen.
How long does bespoke cutting and fitting take?
A single bespoke door usually adds no more than a day to a normal visit. A new cupboard adds a day or two more, depending on how many units need replacing and any worktop work involved.
Does this work with any kitchen brand?
Yes. We measure your actual cabinets rather than relying on a manufacturer’s template. It doesn’t matter if your kitchen came from IKEA, B&Q, Wickes, Howdens, or a bespoke joiner.
Can just one door be replaced, or does it need to be the whole kitchen?
Just one, if that’s all that needs it. Plenty of jobs are a single damaged door or drawer front, and the rest of the kitchen stays untouched.
Get a free quote for your kitchen doors
A quick call or a few photos through our estimate form is usually enough to tell what your kitchen needs: a new door, a new cupboard, or a full wrap alongside them.
Get in touch and we’ll tell you honestly what your kitchen needs, from a single new door to a full new cupboard.
Call 0141 777 5027 or book a free home visit through our estimate form. We’ll bring physical samples and a tape measure, and you’ll have a written quote before we leave.